Friday, March 13, 2009

Bird Spike - Stainless Steel Bird Spike

Bird Spikes

There are several bird spikes in the market. One of them is stainless steel bird spike. Bird Spikes are a low cost stainless steel deterrent product. It deters birds from landing or roosting on light to heavy pressure sites such as ledges, I-beams, parapets, overhangs, pipes, signs, edges of roof, chimneys, etc. Long stainless steel spikes extend upwards and outwards in a way that makes it difficult for birds to land. Because the blunt wires are spaced 1.5” apart, they do not gather debris and nesting materials. With a stainless steel base, installation is extremely easy. Glue the base to the ledge with a construction silicone, no special clips or attachments are required. The base has pre-punched holes so you can use nails or screws if desired. The flexible base allows installation on most architectural forms. Lights, down spouts, sprinklers, security hardware and corners can also be protected with bird spikes. The stainless steel base is easily cut to length with metal snips. Wide and narrow spikes may be used in unison to cover a variety of ledge widths

Installation of Stainless Steel Bird Spike

Before installation, first thing you must do is surface preparation. Obstruction must be removed. Ledges and mounting surface must be dry and free of loose paint, rust, bird droppings and any foreign debris. Bird droppings shall be cleaned, removed and disposed of in a safe manner in accordance with local regulations. Remove or repair articles that may damage bird spikes after installation (tree limbs, loose items on building, etc.)

1. Bird Spikes should be installed straight or follow the contours of the architecture perfectly. Uneven spacing results in an unattractive installation. Spaces left between ends of spikes present a landing opportunity for birds.

2. Bird Spikes should cover the entire ledge width and extend to each corner. Bird spikes are a landing deterrent, not a barrier. It is acceptable to leave 2.5” between rows, measured from wire tips.

3. On surfaces where holes are undesirable apply a bead of construction silicone at a rate of one (1) 13oz. tube per 15 feet of spikes

4. Tips of spikes may be up to 2.5” from back edge of wall.

Example of stainless steel bird spikes are:

1. FlyBye Wide Spike FB600 – Width 4.5” / Height 3.75”

2. FlyBye Narrow Spike FB250 – Width 2.5” / Height 3.75”

Bird Spikes

Wednesday, March 11, 2009

Bird Spike - Advantage Using Bird Spike

Bird Spike

What are bird spikes?

Bird spikes are long thin rods with blunted tips that can be attached to rooftops, fences, lighting, cameras and other structures that will effectively deter birds from landing there.

It is important to note that these spikes do not harm the birds at all. They just limit the amount of space available making it uncomfortable for them to land or perch so that they are forced into finding somewhere else to go.

There are a number of advantages to using bird spikes such as:

1) They are a humane and highly effective way of preventing large numbers of birds from perching anywhere that you don't want them to
2) They are suitable for deterring even larger and heavier birds
3) They are easy to install
4) They last a long time so are an extremely cost effective solution
5) They are inconspicuous from a distance so will not spoil the scenery

If you want to position bird spikes in a spot that is very high, then it is recommended that you call in a professional to fit them for you to avoid the risk of falling.

Bird Spike

Wednesday, February 18, 2009

Bird Spikes – Where and why we must use bird spike

Bird Spikes

Some animals are more lovable than others. Pandas certainly have an edge over rats, for example. Birds are especially lovable, particularly those with beautiful songs to sing. However, not everyone is as keen on birds as the rest of us. Poultry farmers need to keep vigil against any bird that may introduce bird flu to their premises. Airports must also keep birds at bay in case they interfere with aircraft. And site managers are very aware of the damage that bird droppings can do to their buildings.

Poultry Farms
Those rearing poultry are on worldwide alert at the moment. Avian influenza - bird flu - has already spread great distances carried by infected birds landing amongst flocks. The virus is transmitted from the birds' saliva, faeces and nasal secretions. Surfaces and water can be infected just through contact. Fowl that are kept outside are particularly vulnerable. Whereas other farm livestock tend to be kept in fields, poultry is often kept near to other buildings. This allows visiting birds a landing point near to the poultry and therefore time to settle before landing amongst it. By fitting bird spikes to the roofs and guttering of these buildings the birds will quickly move on to another site. Bird spikes may not deter all varieties of bird and other precautions such as random noise generators and bird netting will also be required.

Buildings
Bird droppings can dry and turn to powder. This powder could find itself in the atmosphere of building grounds and even into the building itself, causing a health hazard. Apart from the possibility of avian flu transmission, it is known that bird excrement could cause various illnesses including cryptococcal meningitis. This is an inflammation of the brain and the spinal cord and can be fatal in some cases. Bird droppings may also find their way into guttering. Some modern buildings will recycle rain water for use in fountains, irrigation and even in some cleaning operations. Inadvertent contact with this water could lead to disease. Bird droppings can also cause corrosion damage to buildings. The seriousness of this corrosion will depend on the material the building is made from, its age and the extent of bird activity. Damage to historical buildings is of particular concern, not just to the site management and owner, but to the wider public who may claim an interest in its welfare. Once again, as part of a comprehensive program to minimize bird activity, bird spikes will need to be placed on roofs, in guttering and along some walls and even railings and signage.

Airports
Birds can be a serious hazard around airports. A bird sucked into a jet engine can cause it to shut down and may cause dangerous shards of metal to go flying in all directions. An airplane that is taking off or landing is particularly vulnerable. Airports go to great lengths to minimize the amount of birds in the area. For example, you will not find fruit trees or bushes in the vicinity of an airport. Buildings within the grounds of the airport will be landing points for birds. As part of wider control measures to minimize avian activity, bird spikes will be found on many roofs of buildings within the airport grounds as well as on walls, railings and signage.

It is all very well keeping birds away from our farms, buildings and airports, but they do need to go somewhere. It is important that there are sufficient trees and other suitable places for birds to go. This doesn't help pigeons, though. They would not go in trees. A lack of landing spots for pigeons doesn't bother most people as they are seen as a pest that needs to be discouraged. Birds are fine, especially when they are heard and not seen! We should treasure them for certain. As long, that is, as they are not making us ill, damaging our buildings or crashing our airplanes!

Vernon Stent is the content writer for Arkay Hygiene that deals with fly killers and other pest control products. Here is a link to Bird Spikes

Bird Spikes

Friday, February 13, 2009

Bird Spike Installation

Bird Spike

Bird Spike

A bird spike, also known as anti-roosting spikes or roost modification,is a device consisting of long, needle-like rods used for bird control. They can be attached to building ledges, street lighting, and commercial signage to prevent wild or feral birds from perching or roosting. Birds can produce large quantities of unsightly and unhygienic feces,and some birds have very loud calls that can be inconvenient for nearby residents, especially at night. As a result, bird control spikes are used to deter these birds without causing them harm or killing them.

Bird spikes are normally around 1 foot (0.30 m) long,and work by reducing the area available for birds to land on. This forces larger varieties of birds, such as seagulls, pigeons, crows and vultures, to land elsewhere. As the birds do not come into contact with the spikes, the birds go unharmed. As a result,bird spikes are recommended for deterring pigeons from gardens.

Described as "the most effective (type of) stand-alone bird deterrent",bird spikes can be placed along ledges, walls, on top of commercial signage, closed circuit television cameras and in rain gutters, in order to prevent birds from perching on the surfaces. Bird spikes are most common in city centres and coastal areas, where feral birds are more common and more likely to come into conflict with humans.In addition, killing or harming birds without a valid reason is illegal in some areas.

As well as being used to control wild birds, bird spikes see limited use in preventing larger climbing animals such as squirrels, racoons and snakes from crossing an area.

Some bird spikes are electrified, using the same principle as an electric fence to increase effectiveness, and the distress call of the shocked bird can frighten others in the area. However, such devices cause unnecessary harm to birds, and are therefore illegal in some areas, such as the United Kingdom. Sharp-tipped bird spikes are illegal in much of the rest of the world,and are unsuitable for areas which are regularly accessible for humans. As a result, some companies manufacture special blunted spikes for use where sharp spikes are dangerous or illegal. However, the blunt spikes are less effective at deterring birds, and cannot block climbing animals.

Bird Spike